The software for the GR8 Battery Diagnostic Station is updated periodically to fix software bugs and enhance the tool's function. To help you update the GR8 more quickly, Honda no longer distributes CDs for it. You can now use the Midtronics GR8 update wizard to download software and firmware to your GR8 using a PC and the Internet. It is extremely important to use the latest GR8 software to ensure that the current battery testing and diagnostic procedures are used.
Honda is also introducing a new policy to ensure that GR8 testers are updated promptly. The GR8 software must now be updated within 3 days of receiving notification from an iN message or other Honda communication. If an out-of-date version is used, any battery replacements may not be covered under warranty.
USB-to-mini-USB cable (this cable came with the GR8): Midtronics P/N A128
^
Internet access
^
An IBM-compatible PC with Windows 95 operating system or higher (Windows 2000 or XP is preferred).
To order the GR8 Diagnostic Station, or the USB-to-mini-USB cable, go to the Honda Tool and Equipment catalog on the iN (select Service > Service Bay > Tool and Equipment > Online Catalog), or call.
SOFTWARE VERSION
The new software version is 192-21 0007E.
To check the GR8 version software, click on:
Language > Options > Info > | Version
WARRANTY CLAIM INFORMATION
None. This service bulletin is for information only.
GR8 UPDATE INSTRUCTIONS
The update should take 5-10 minutes. Make sure that the update is not interrupted. If the update is interrupted, it could damage the GR8 and require you to send the GR8 to Midtronics for repair. This repair is not covered by warranty.
1.
Make sure the GR8 is off and the SD card is removed.
2.
Online, go to www.midtronics.com/home/clientlogin/clientlogin.aspx:
3.
Enter your username and password, then click the Login button.
Username: hondagr8
Password: hondagr8
4.
You should see an image of the GR8 tester. Click on the highlighted Update Software link under the image.
5.
Fill in your dealership information, then click
SUBMIT REQUEST.
6.
You should see the image of the GR8 tester again. Click on the highlighted Honda GR8 Software Update link.
7.
A File Download - Security Warning screen appears. Select Run.
8.
A file will be downloaded to your computer. After it is finished, an Internet Explorer - Security Warning screen appears. Select Run.
NOTE :Depending on your network setup, you may see more warning screens than are shown here.
9.
The Midtronics Update Wizard appears. Make sure software version 192-210007E.mup appears as the software update file.
NOTE :If the wrong software file appears or is not shown, click Change MUP File, and select 192-210007E.mup.
10.
Turn on the GR8, and follow the Update Wizard on-screen instructions.
11.
When the update is complete, the Update Results screen appears, indicating the update was successful. Click Finish to close the Update Wizard.
12.
Turn the GR8 off for 10 seconds. Reinstall the SD card, then turn the GR8 on, and confirm that the software is updated to the software version listed under SOFTWARE VERSION.
13.
If an error message appears anytime during the update, follow the on-screen instructions, and try updating the GR8 again. If the error message still does not go away, or if you have any problems updating the GR8, call Midtronics at 866-592-8054.
14.
If you have more than one GR8, repeat the update procedure for each unit.
15.
Once all GR8s are updated, store the USB-to-mini-USB cable in a safe location for future updates.
