Your Vehicle: 2001 Ford Escort ZX2 L4-2.0L DOHC VIN 3
 
Vehicle » Powertrain Management » Relays and Modules - Powertrain Management » Relays and Modules - Computers and Control Systems » Engine Control Module » Service and Repair » Powertrain Control Module - Automatic Transaxle  
 
 
  Powertrain Control Module - Automatic Transaxle  
 

REMOVAL

CAUTION: Electronic modules are sensitive to static electrical charges. If the modules are exposed to these charges, damage may result.

  1. Disconnect the battery ground cable.
  2. Remove the parking brake and shift consoles.

  

  1. Place the gearshift lever in LOW and remove the transmission control selector dial bezel screws.

  

  1. Turn the transmission control selector dial bezel one-quarter turn counterclockwise.

  

  1. Loosen the bolt and disconnect the Powertrain Control Module (PCM) electrical connector.

  

  1. Slide the PCM straight out.

NOTE: Make sure the anti-rattle clips are correctly aligned when installing.

INSTALLATION

  1. To install, reverse the removal procedure.