Your Vehicle: 2001 Ford Escort ZX2 L4-2.0L DOHC VIN 3
 
Vehicle » Powertrain Management » Sensors and Switches - Powertrain Management » Sensors and Switches - Ignition System » Camshaft Position Sensor » Service and Repair  
 
 
  Service and Repair  
 

REMOVAL

  1. Disconnect the battery ground cable.

  

  1. Disconnect the electrical connector.

  

  1. Remove the Camshaft Position (CMP) sensor.
    • Remove the bolt.
    • Remove the CMP sensor.

INSTALLATION

  1. Lubricate the O-ring seal lightly with Super Premium XO-5W-30-QSP Motor Oil or equivalent, meeting Ford specification WSS-M2C153-G. Position the CMP sensor.

NOTE: Inspect the O-ring seal for damage; install a new seal if necessary.

  

  1. To install, reverse the removal procedure.