NOTE: Prior to installation of the transmission assembly, the torque converter pilot hub must be properly lubricated. Use Ford Multi-Purpose Grease DOA7-19584-AA or equivalent meeting Ford specification ESR-M1C159-A and ESB-M1C93-B.
Install the computer control relay module (CCRM) .
Install the CCRM and bracket as an assembly.
Install the CCRM bracket bolt and the CCRM bracket nut.
Connect the CCRM electrical connector.
Install the engine air cleaner.
Install the air cleaner inlet tube.
Install the battery tray.
Add the specified amount of Motorcraft MERCON Multi-Purpose Automatic Transmission Fluid XT-2-QDX or equivalent meeting Ford specification MERCON to the proper level and check for leaks. With the engine at operating temperature, recheck the level and for leaks. MERCON (R) Automatic Transmission Fluid is being replaced by MERCON (R) V as a service fluid, as per TSB 06-14-4.
Road test the vehicle and check the shift points and shift quality.