Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Technical Service Bulletins » All Technical Service Bulletins » Recall PC012 - Front Strut Insulator Cracking  
 
 
  Recall PC012 - Front Strut Insulator Cracking  
 

Reference: NTB09-086

Date: October 6, 2009

VOLUNTARY SAFETY RECALL CAMPAIGN
2009 - 2010 ALTIMA AND MAXIMA FRONT STRUT MOUNTING INSULATOR

CAMPAIGN ID #: PC012

NHTSA #: 09V-358

APPLIED VEHICLES:
2009 - 2010 Maxima (A35)
2009 - 2010 Altima (L32, CL32 & L32HV) Sedan, Coupe, & Hybrid

Check Service COMM to confirm campaign eligibility.

INTRODUCTION

Some specific model year 2009 2010 Altima and Maxima vehicles may have been built with front strut mounting insulators that were not manufactured to specification. The strut mounting insulators on these specific vehicles may crack. To remedy this potential condition Nissan is conducting this voluntary safety recall campaign to replace the strut mounting insulators with new ones at no charge for parts or labor.

IDENTIFICATION NUMBER

Nissan has assigned identification number PC012 to this campaign. This number must appear on all communications and documentation of any nature dealing with this campaign.

DEALER RESPONSIBILITY

It is the dealer's responsibility to check Service Comm for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer's inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.

  

PARTS INFORMATION

  

CLAIMS INFORMATION