Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Technical Service Bulletins » All Technical Service Bulletins » Emissions - System Readiness Test (SRT) Drive Patterns » Service Procedure » Step 6: Recheck For DTC  
 
 
  Step 6: Recheck For DTC  
 

Step 6: Recheck for DTC

Upon completion of the Drive Pattern, determine if any DTCs have been stored. Only in rare cases will this occur.

^ If a DTC has been stored after completing the Drive Pattern, it must be repaired. Refer to ASIST for diagnostic and repair information.

NOTE: Normal warranty coverage will apply for DTC repairs.

^ Once the DTC is repaired, erase the stored DTC. Turn the ignition OFF for 10 seconds, and then repeat the entire Drive Pattern (Step 5) to "COMPLETE" the SRTs.

^ If no DTCs have been stored, DO NOT touch "Erase" or all SRT items will reset to "INCOMPLETE."