Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Technical Service Bulletins » All Technical Service Bulletins » Steering - Column Lock Replacement Information  
 
 
  Steering - Column Lock Replacement Information  
 
Classification:
EL14-006

Reference:
NTB14-011

Date:
February 18, 2014

2009 ALTIMA AND MAXIMA; STEERING COLUMN LOCK REPLACEMENT

APPLIED VEHICLES: 2009 Altima Sedan (L32) 2009 Altima Coupe (L32)
2009 Altima Hybrid (L32)
2009 Maxima (A35)

SERVICE INFORMATION

When replacing the Electronic Steering Column Lock, there are two possible service parts that may be shipped to the dealer: 48700-9N00B or 48700-1NC0A. These part numbers are interchangeable.

  

48700-1NC0A is shown in Figure 1. Its shape (physical appearance) is different than the original.

If you receive Electronic Steering Column Lock P/N 48700-1NC0A, the bolts that hold it in place may not line up. You may not be able to start the bolt threads.

If you encounter the above condition, use a hand file to remove a small amount of metal from the edges shown in Figure 1.

^ See photos for "before" and "after" close-ups.

PARTS INFORMATION

Order Electronic Steering Column Lock using the electronic parts catalog (FAST or equivalent).

  

Close up before metal is removed:

^ A green marker was used to mark the area that is to be filed.

^ Be careful not to damage the plastic guide.

^ Use tape to cover openings and prevent metal shavings from entering the assembly (see Figure 3).

NOTE :

^ Do not use any power tools (grinders, sanders, etc.) to remove the small amount of metal.

^ Only a very small amount of metal removal, with a hand file, is needed.

  

Close up after metal is removed:

^ Use tape to cover openings and prevent metal shavings from entering the assembly.

^ Remove only a small amount of metal as shown.

^ After filing, if the assemble still will not fit, file a little more and retry.

  

Disclaimer