Computers/Controls - CONSULT III Plus(R) Saved Data List
Date: September 12, 2012
SAVED DATA LIST REPROGRAMMING WITH CONSULT III PLUS
When performing a "Reprogramming" operation with C-III plus, the screen in Figure 1 may display.
This screen displays "Saved Data" from previous C-III plus operations.
During the initial "Reprogramming Confirmation" set-up, if you get this screen:
Select Delete, then
Select Other Operation, then
Continue with the reprogramming procedure.
NOTE: If reprogramming does not complete, this screen can display for reprogramming recovery. Do not select Delete if this screen displays during reprogram recovery.