Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Transmission and Drivetrain » Manual Transmission/Transaxle » Service and Repair » Overhaul » Mainshaft And Gear » Disassembly  
 
 
  Disassembly  
 

MAINSHAFT AND GEAR

Disassembly

  

  1. Before disassembling, measure the end play of 1st and 2nd main gears.

End play standard value : Refer to See: Specifications\Mechanical\End Play.

  

  1. Remove snap ring.
  2. Remove C-ring holder and then remove mainshaft C-ring.

  

  1. Press out mainshaft rear bearing, 6th main gear adjusting shim, and 6th main gear using Tool and a puller.

Tool number : ST33052000 ( - )

  1. Remove 5th-6th mainshaft spacer.

  

  1. Press out 4th main gear and 5th main gear using Tool and a puller.

Tool number : ST33052000 ( - )

  1. Remove 4th main gear adjusting shim.
  2. Remove 3rd-4th mainshaft spacer.

  

  1. Press out 3rd main gear and 2nd main gear using Tool (A) and a puller (B).

Tool number : KV40105020 ( - )

  1. Remove 2nd needle bearing.

  

  1. Press out 2nd main gear bushing, 1st-2nd synchronizer hub assembly, 1st main gear, 1st needle bearing, 1st main gear bushing, and reverse main gear using Tool (A).

Tool number : KV40105020 ( - )