Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Transmission and Drivetrain » Clutch » Hydraulic Hose » Service and Repair » Removal and Replacement  
 
 
  Removal and Replacement  
 

CLUTCH PIPING

Removal and Installation

CAUTION:
Do not spill clutch fluid onto painted surfaces. If it spills, wipe up immediately and wash the affected area with water.

REMOVAL

  1. Remove the air cleaner and air duct. Refer to See: Engine, Cooling and Exhaust\Engine\Air Filter Element\Service and Repair for QR25DE and See: Engine, Cooling and Exhaust\Engine\Air Filter Element\Service and Repair for VQ35DE.
  2. Remove the lock pin and disconnect the clutch master cylinder connector.
  3. Remove the clutch tubes from the branch connector.
  4. Remove the clutch tube and air bleed connector valve.
  5. Remove the branch connector.
  6. Remove lock pin and disconnect the CSC connector.

INSTALLATION
Installation is in the reverse order of removal.