Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Brakes and Traction Control » Technical Service Bulletins » Recalls » Campaign PC125 - Brake Master Cylinder Replacement  
 
 
  Campaign PC125 - Brake Master Cylinder Replacement  
 

Reference: NTB12-011C

Date: MARCH 7, 2013

VOLUNTARY SERVICE CAMPAIGN
2007-2012 ALTIMA SEDAN & COUPE BRAKE MASTER CYLINDER

This bulletin has been amended. "This Voluntary Service Campaign DOES NOT APPLY to Altima Hybrid (L32H) vehicles" was added to the Applied Vehicles section. Please discard previous versions.

CAMPAIGN ID #: PC125

APPLIED VEHICLES: 2007 - 2012 Altima Sedan & Coupe (L32 & CL32)

>> This Voluntary Service Campaign DOES NOT APPLY to Altima Hybrid (L32H) vehicles<<

Refer to the flow chart (Repair Overview) for campaign eligibility.

INTRODUCTION

Nissan is conducting a Voluntary Service Campaign on Model Year 2007-2012 Nissan Altima (L32) Sedan and Coupe vehicles to inspect the brake system in vehicles with an illuminated brake warning lamp. Nissan dealers will inspect the brake system and confirm that no brake fluid leak is present. If no leak is present, the reservoir will be topped off. If a leak in the brake master cylinder is identified, the brake master cylinder will be replaced.

The affected vehicles are equipped with a brake warning lamp that will illuminate to alert the driver when fluid in the brake fluid reservoir is low. Fluid in the reservoir may become low due to normal brake pad wear and not because of any brake system malfunction. While in most instances an illuminated brake warning lamp is due to normal brake pad wear, a small percentage of vehicles affected by this campaign may have a slow brake fluid leak at the brake master cylinder.

IDENTIFICATION NUMBER

Nissan has assigned identification number PC125 to this campaign. This number must appear on all communications and documentation of any nature dealing with this campaign.

DEALER RESPONSIBILITY

This action is only required if the brake warning lamp is currently illuminated, or the customer states it was recently illuminated while driving. In addition, this campaign is intended to promote customer satisfaction. This inspection may also be performed based on customer request, regardless of the warning lamp illumination.

  

Repair Overview

  

REQUIRED SPECIAL TOOL J-49749

  

PARTS INFORMATION

  

CLAIMS INFORMATION

  

Disclaimer