Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Restraints and Safety Systems » Seat Belt Systems » Service Precautions » Technician Safety Information » Precaution For Seat Belt Service  
 
 
  Precaution For Seat Belt Service  
 

PRECAUTIONS

Precaution for Seat Belt Service

CAUTION:

  • Before removing the front seat belt pre-tensioner assembly, turn the ignition switch off, disconnect both battery cables and wait at least 3 minutes.
  • Do not use electrical test equipment for front seat belt pre-tensioner connector.
  • After replacing or reinstalling front seat belt pre-tensioner assembly, or reconnecting front seat belt pre-tensioner connector, check the system function. Refer to See: Air Bag Systems\Testing and Inspection\Component Tests and General Diagnostics\Diagnostic Procedure 1.
  • Do not disassemble buckle or seat belt assembly.
  • Replace anchor bolts if they are deformed or worn out.
  • Never oil tongue and buckle.
  • If any component of seat belt assembly is questionable, do not repair. Replace the whole seat belt assembly.
  • If webbing is cut, frayed, or damaged, replace seat belt assembly.
  • When replacing seat belt assembly, use a genuine NISSAN seat belt assembly.