Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
Vehicle » Body and Frame » Interior Moulding / Trim » Service Precautions » Sedan  



  • After removing and installing any opening/closing parts, make sure to perform all adjustments for proper operation.
  • Check the lubrication level, damage, and wear of each part. If necessary, grease or replace it.
  • When removing or disassembling any part, be careful not to damage or deform it. Protect parts which may get in the way with cloth.
  • When removing parts with a screw driver or other tool, protect parts by wrapping them with vinyl or tape.
  • Keep removed parts protected with cloth.
  • If a clip is deformed or damaged, replace it.
  • If a non reuseable part is removed, replace it with a new one.
  • Tighten bolts and nuts firmly to the specified torque.
  • After re-assembly has been completed, make sure each part functions correctly.
  • Remove stains in the following manner: