DIAGNOSIS AND REPAIR WORK FLOW

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description

BEFORE REPLACEMENT
When replacing BCM, save or print current vehicle specification with CONSULT-III configuration before replacement.

NOTE:
If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.

AFTER REPLACEMENT

CAUTION:

• When replacing BCM, you must perform "WRITE CONFIGURATION" with CONSULT-III.
• Complete the procedure of "WRITE CONFIGURATION" in order.
• If you set incorrect "WRITE CONFIGURATION", incidents might occur.
• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
• When replacing BCM, perform the system initialization (NATS).