Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Windows and Glass » Rear Door Window Regulator » Service and Repair » Procedures  
 
 
  Procedures  
 

REAR REGULATOR

Inspection

Inspection after Removal
Check the regulator assembly for the following items. If a malfunction is detected, replace or grease it.

  • Gear wear
  • Regulator deformation
  • Grease condition for each sliding part

  

Apply multi-purpose grease at points (A) shown.

FINAL Inspection

  • Make sure the glass is securely fit into the glass run groove.
  • Lower the glass slightly [approx. 10 to 20 mm (0.39 to 0.79 in) ], and make sure the clearance to the sash is parallel. If the clearance between the glass and sash is not parallel, loosen the regulator mounting bolts, guide rail mounting bolts, and glass and carrier plate mounting bolts to correct the glass position.