FRONT WIPER

FRONT WIPER DRIVE ASSEMBLY : Removal and Installation

REMOVAL

1. Operate front wiper motor, and stop at the auto stop position.
2. Remove wiper arms. Refer to See: Wiper Arm\Service and Repair\Removal and Installation.
3. Remove the cowl top cover. For Sedan Refer to See: Body and Frame\Cowl\Cowl Moulding / Trim\Service and Repair\Sedan. For Coupe Refer to See: Body and Frame\Cowl\Cowl Moulding / Trim\Service and Repair\Coupe.

4. Remove the strut brace bolts (A), detach the wiper drive assembly harness clips, then remove the strut brace (1).
5. Detach the wiper drive harness clip from the wiper drive assembly frame.

6. Remove the front wiper drive assembly bolts (A), disconnect the wiper drive motor connector (B) and remove the front wiper drive assembly (1).

INSTALLATION

1. Install the front wiper drive assembly.
2. Connect wiper motor connector. Turn wiper switch ON to operate wiper motor, then turn wiper switch OFF (auto stop).
3. Attach the wiper drive harness clip to the wiper drive assembly frame.
4. Install the strut brace, then attach the wiper drive assembly harness clips.
5. Install the cowl top cover. For Sedan Refer to See: Body and Frame\Cowl\Cowl Moulding / Trim\Service and Repair\Sedan. For Coupe Refer to See: Body and Frame\Cowl\Cowl Moulding / Trim\Service and Repair\Coupe
6. Attach the wiper arms. Refer to See: Wiper Arm\Service and Repair\Removal and Installation.
7. Adjustment of wiper arm stop location. Refer to See: Wiper Arm\Service and Repair\Removal and Installation.