Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » A L L Diagnostic Trouble Codes ( DTC ) » Testing and Inspection » B Code Charts » B210C » Sedan With Intelligent Key  
 
 
  Sedan With Intelligent Key  
 

B210C STARTER CONTROL RELAY

Description
Starter control relay, integrated in IPDM E/R, permits the starter relay operation when in N or P position and the steering is locked or unlocked. It is installed in parallel with the starter relay.

DTC Logic

DTC DETECTION LOGIC

NOTE:

  

DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE

  1. Turn the power supply position to start under the following conditions and wait for at least 1 second.
    • CVT selector lever is in the P or N position.
    • Depress the brake pedal
  1. Check "Self diagnostic result" with CONSULT-III. Is DTC detected?

YES >> Refer to Diagnosis Procedure.
NO >> Inspection End.

Diagnosis Procedure
1.Inspection START

  1. Turn ignition switch ON.
  2. Check "Self diagnostic result" with CONSULT-III.
  3. Touch "ERASE".
  4. Perform DTC Confirmation Procedure. Refer to See: Testing and Inspection. Is the DTC B210C displayed again?

YES >> Replace IPDM E/R. Refer to See: Power and Ground Distribution\Power Distribution Module\Service and Repair.
NO >> Inspection End.