Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » A L L Diagnostic Trouble Codes ( DTC ) » Testing and Inspection » B Code Charts » B2108 » Sedan Without Intelligent Key  
 
 
  Sedan Without Intelligent Key  
 

B2108 STEERING LOCK RELAY

Description
The steering lock relay ON signal is transmitted to IPDM E/R by BCM via CAN communication.
IPDM E/R turns the steering lock relay ON and transmits the release of the steering to BCM.

DTC Logic

DTC DETECTION LOGIC

NOTE:

  

DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE

  1. Press the push-button ignition switch under the following conditions and wait for at least 1 second.
    • CVT selector lever is in the P position
    • Do not depress the brake pedal.
  1. Check "Self diagnostic result" with CONSULT-III. Is DTC detected?

YES >> Refer to Diagnosis Procedure.
NO >> Inspection End.

Diagnosis Procedure
1.CHECK FUSE

  1. Turn ignition switch OFF.
  2. Check 10A fuse (No. 40, located in IPDM E/R). Is the Inspection result normal?

YES >> Replace IPDM E/R. Refer to See: Power and Ground Distribution\Power Distribution Module\Service and Repair.
NO >> Check the following.

  • Harness for open or short between IPDM E/R and battery
  • Fuse