Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » A L L Diagnostic Trouble Codes ( DTC ) » Testing and Inspection » C Code Charts » C1131 » TCS/ABS  
 
 
  TCS/ABS  
 

C1130, C1131, C1132, C1133 ENGINE SIGNAL

Description

DTC Logic

DTC DETECTION LOGIC
DTC Detection Logic

DTC CONFIRMATION PROCEDURE
DTC Confirmation Procedure

Diagnosis Procedure
Inspection PROCEDURE
1.CHECK SELF-DIAGNOSIS RESULTS
Check self-diagnosis results.

  

Is above displayed on the self-diagnosis display?
YES >> GO TO 2
NO >> Inspection end.
2.CHECK ENGINE SYSTEM

  1. Perform ECM self-diagnosis. Repair or replace items indicated, then perform ECM self-diagnosis again. Refer to See: Powertrain Management\Computers and Control Systems\Testing and Inspection\Scan Tool Testing and Procedures\On Board Diagnostic (OBD) System\CONSULT-III Function.
  2. Perform ABS actuator and electric unit (control unit) self-diagnosis. Refer to See: Brakes and Traction Control\Antilock Brakes / Traction Control Systems\Testing and Inspection\Scan Tool Testing and Procedures\TCS. Is the Inspection result normal?

YES >> Inspection end.
NO >>

  • Repair or replace malfunctioning components.
  • Perform the self-diagnosis, and make sure that the result shows "NO DTC IS DETECTED".