ALLDATADIY.COM - Do It Yourself Automotive Diagnostic & Repair Information
Log In | ALLDATA Corporate Site | AutoZone.com
Buy ALLDATA Now View Sample Data Read Testimonials About ALLDATA View Technical Service Bulletins/Recalls Contact ALLDATA Back Home
Home >> Jim Grant Tech Tips >> Go Back
List Audi Tech Tips
List Cadillac Tech Tips
List Chevy Tech Tips
List Chrysler Tech Tips
List Dodge - Plymouth Tech Tips
List GMC Tech Tips
List Ford Tech Tips
List Honda Tech Tips
List Nissan Tech Tips
List Toyota Tech Tips
Search By Title:

Back To Jim Grant main Page

[an error occurred while processing this directive] [an error occurred while processing this directive]
Home » Services For Vehicle Owners» Tech Tips Home » Jim Grant's Tech Tips

Jim Grant's Tech Tips

88 Dodge Caravan: Once a Week Stall
Q:
I have a 1988 Dodge Caravan with a stalling problem that a number of garages can't diagnose. It stalls going about 20-25 MPH usually when I turn a corner and let my foot off the accelerator or if I'm going up a driveway that's on a hill.

It also stalls going into reverse, but every time it stalls, my foot is lightly on the accelerator and I can start it right up again. I've replaced the MAP sensor, TPS sensor, plug wires, power module, had an injector cleaning, and carbon treatment. Also the car usually only stalls once a week. I would like to keep the car till the fall, so I hope you have a suggestion.

A: Only stalls once a week? Why that's simple, just don't drive it on that day. A once a week stalling problem can be a real bear to diagnose and correct.

You did provide a piece of information that could be helpful. The stalling condition occurs when your foot is lightly on the gas pedal. There are two items that would be worth checking: First, are the throttle plates clean and adjusted correctly? There is a problem with deposits building up on the throttle plates on vehicles of your type. This will cause a stalling condition which creates the next problem: Second, incorrectly adjusting idle speed to cure a stalling condition will reposition the throttle plates. This can cause certain emissions controls to be active prematurely, resulting in a man made stalling condition. Correct throttle plate positioning is critical to today's computerized engines. A qualified technician must have specialized tools to correctly adjust and set throttle position.

If the throttle plates are not the problem then this service bulletin is worth checking into. The ALLDATA Information System shows a bulletin #18-13-91 that addresses the condition you describe. The fix requires a reprogrammed computer and modification to emissions controls that are active under very light throttle or light acceleration. The bulletin provides the necessary part number and repair procedure.

[an error occurred while processing this directive]
[an error occurred while processing this directive]