REAR BUMPER

Removal and Installation

1. Remove the LH and RH rear combination lamps. Refer to See: Lighting and Horns\Marker Lamp\Service and Repair\Removal And Installation.
2. Remove both the rear wheels and tires. Refer to See: Maintenance\Wheels and Tires\Service and Repair.
3. Remove the rear bumper fascia clips and screws, then remove the rear bumper fascia.
4. Remove the rear energy absorbing foam.
5. Remove the rear bumper reinforcement.
6. Remove the rear bumper supports.

INSTALLATION
Installation is in the reverse order of removal.