Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Powertrain Management » Computers and Control Systems » Body Control Module » Testing and Inspection » Additional Service When Replacing Control Unit » Special Repair Requirement  
 
 
  Special Repair Requirement  
 

Inspection AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement

1.PERFORM INITIALIZATION OF NVIS (NATS) SYSTEM AND REGISTRATION OF ALL NVIS (NATS) IGNITION KEY IDS
Refer to See: Accessories and Optional Equipment\Antitheft and Alarm Systems\Testing and Inspection\Programming and Relearning\ECM Re-Communicating Function\Special Repair Requirement\Coupe (COUPE models) or See: Accessories and Optional Equipment\Antitheft and Alarm Systems\Testing and Inspection\Programming and Relearning\ECM Re-Communicating Function\Special Repair Requirement\Sedan With Intelligent Key (SEDAN models).
>> GO TO 2.
2.PERFORM VIN REGISTRATION
Refer to See: Engine Control Module\Testing and Inspection\Special Repair Requirement.
>> GO TO 3.
3.PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
Refer to See: Accelerator Pedal Position Sensor\Testing and Inspection\Special Repair Requirement.
>> GO TO 4.
4.PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
Refer to See: Testing and Inspection\Programming and Relearning\Throttle Valve Closed Position Learning\Special Repair Requirement.
>> GO TO 5.
5.PERFORM IDLE AIR VOLUME LEARNING
Refer to See: Fuel Delivery and Air Induction\Idle Speed\Testing and Inspection\Idle Air Volume Learning\Special Repair Requirement.
>> END