Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Transmission and Drivetrain » Continuously Variable Transmission/Transaxle » Fluid - CVT » Service and Repair » CVT RE0F10A » Checking  
 
 
  Checking  
 

CVT FLUID

Inspection

CHECKING CVT FLUID
Fluid level should be checked with the fluid warmed up to 50° to 80°C (122° to 176°F) . The fluid level check procedure is as follows:

  

  1. Check for fluid leakage.
  2. With the engine warmed up, drive the vehicle in an urban area. When ambient temperature is 20°C (68°F) , it takes about 10 minutes for the CVT fluid to warm up to 50° to 80°C (122° to 176 °F) .
  3. Park the vehicle on a level surface.
  4. Apply parking brake firmly.
  5. With engine at idle, while depressing brake pedal, move shift selector throughout the entire shift range.

  

  1. Pull out the CVT fluid level gauge from the CVT fluid charging pipe after pressing the tab on the CVT fluid level gauge to release the lock.
  2. Wipe fluid off the CVT fluid level gauge. Insert the CVT fluid level gauge rotating 180° from the originally installed position, then securely push the CVT fluid level gauge until it meets the top end of the CVT fluid charging pipe.

  

CAUTION:
When wiping away the CVT fluid level gauge, always use lint-free paper, not a cloth rag.

  1. Place the selector lever in "P" or "N" and make sure the fluid level is within the specified range.

  

CAUTION:
When reinstalling CVT fluid level gauge, insert it into the
CVT fluid charging pipe and rotate it to the original installation position until it is securely locked.

CVT FLUID CONDITION
Check CVT fluid condition.