Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Transmission and Drivetrain » Continuously Variable Transmission/Transaxle » Seals and Gaskets » Service and Repair » Differential Side Oil Seal » CVT RE0F09B » Removal And Installation  
 
 
  Removal And Installation  
 

DIFFERENTIAL SIDE OIL SEAL

Removal and Installation

REMOVAL

  1. Remove drive shaft assembly. Refer to See: Drive Axles, Bearings and Joints\Axle Shaft Assembly\Service and Repair\Removal and Installation (Left Side) and See: Drive Axles, Bearings and Joints\Axle Shaft Assembly\Service and Repair\Removal and Installation (Right Side).

  

  1. Remove the differential side oil seal using suitable tool

CAUTION:
Do not scratch transaxle case or converter housing.

INSTALLATION

  1. Drive the new differential side oil seal into the transaxle case side (B) and converter housing side (C) until it is flush using Tools.

  

  

CAUTION:

  • Do not reuse differential side oil seals.
  • Apply specified NISSAN CVT fluid to side oil seals.
  1. Install drive shaft assembly. Refer to See: Drive Axles, Bearings and Joints\Axle Shaft Assembly\Service and Repair\Removal and Installation (Left Side) and See: Drive Axles, Bearings and Joints\Axle Shaft Assembly\Service and Repair\Removal and Installation (Right Side).
  2. Check CVT fluid level. Refer to See: Fluid - CVT\Service and Repair\CVT RE0F09B.