CONTROL CABLE

Removal and Installation

REMOVAL

1. Shift control lever to "P".
2. Remove the air filter assembly. Refer to See: Engine, Cooling and Exhaust\Engine\Air Cleaner Housing\Service and Repair.
3. Remove the control cable nut and control cable form the manual lever.
4. Remove the lock plate and the control cable from the bracket.
5. Remove the center console. Refer to See: Body and Frame\Interior Moulding / Trim\Dashboard / Instrument Panel\Service and Repair\Removal And Installation.
6. Remove the bracket covering the retainer grommet.
7. Remove the retainer grommet bolts and the retainer grommet.
8. Remove the control cable from the control device assembly.
9. Remove the control cable from the vehicle.

INSTALLATION
Installation is in the reverse order of removal.

• When installing the control cable to the control device assembly, make sure that the control cable socket is fully pressed into the control device assembly, and the control cable end is fully pressed in with the ribbed surface facing upward.
• After installation is complete, adjust and check the CVT position. Refer to See: Shifter CVT\Adjustments\CVT RE0F10A\Control Device.