CONTROL LINKAGE
Adjustment
SELECT CABLE ADJUSTMENT
- Remove the select cable eye end (1) from the select lever (2) of the control device.
- Slide the lock (A) on the select cable eye end (1) away from the cable end.
- Turn the select cable eye end (1) over and push the stopper (B) to release the adjustment.
- Install the select cable eye end (1) to the select lever (2) of the control device
- Hold the shift lever with the gap between the reverse gate stopper and the shifter base at the specified distance (A).
Distance "A" : 6.3 - 7.0 mm (0.25 - 0.28 in)
- Push the stopper (B) into the cable eye end housing (1).
- Slide the lock (A) over the stopper (B).
- Check for smooth gear select operation.
|
