Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Accessories and Optional Equipment » Keyless Entry » Testing and Inspection » Component Tests and General Diagnostics » Trunk Opener Request Switch » Diagnosis Procedure » Coupe  
 
 
  Coupe  
 

TRUNK OPENER REQUEST SWITCH

Description

Performs trunk lid open request when it is pressed.

TRUNK OPENER REQUEST SWITCH

Diagnosis Procedure

1.CHECK TRUNK OPENER REQUEST SWITCH OUTPUT SIGNAL

  1. Turn ignition switch OFF.

  

  1. Check voltage between BCM connector and ground.

  

Is the Inspection result normal?
YES >> GO TO 6
NO >> GO TO 2
2.CHECK TRUNK OPENER REQUEST SWITCH CIRCUIT

  1. Disconnect BCM and trunk opener request switch connector.

  

  1. Check continuity between BCM connector and trunk opener request switch connector.

  

  1. Check continuity between BCM connector and ground.

  

Is the Inspection result normal?
YES >> GO TO 3
NO >> Repair or replace harness between BCM and trunk opener request switch.
3.CHECK TRUNK OPENER REQUEST SWITCH GROUND CIRCUIT

  

Check continuity between trunk opener request switch connector and ground.

  

Is the Inspection result normal?
YES >> GO TO 4
NO >> Repair or replace trunk opener request switch ground circuit.
4.CHECK BCM OUTPUT SIGNAL

  1. Connect BCM connector.

  

  1. Check voltage between BCM connector and ground.

  

Is the Inspection result normal?
YES >> GO TO 5
NO >> Replace BCM. Refer to See: Body and Frame\Body Control Systems\Body Control Module\Service and Repair.
5.CHECK TRUNK OPENER REQUEST SWITCH
Refer to See: Component Inspection\Coupe.
Is the Inspection result normal?
YES >> GO TO 6
NO >> Replace trunk opener request switch.
6.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
>> Inspection End.