TRUNK LID OPENER SWITCH
Description
Transmits trunk lid open signal to BCM.
TRUNK LID OPENER SWITCH
Diagnosis Procedure
1.CHECK TRUNK LID OPEN INPUT SIGNAL
- Remove keyfob from key slot.
- Turn on trunk lid opener cancel switch.
- Check voltage between BCM connector and ground.
Is the Inspection result normal?
YES >> GO TO 5
NO >> GO TO 2
2.CHECK TRUNK LID OPENER SWITCH CIRCUIT
- Disconnect BCM connector.
- Check continuity between BCM connector and trunk lid opener switch connector.
- Check continuity between BCM connector and ground.
Is the Inspection result normal?
YES >> GO TO 3
NO >> Repair harness or connector.
3.CHECK TRUNK LID OPENER SWITCH GROUND CIRCUIT
Check continuity between trunk lid opener switch connector and ground.
Is the Inspection result normal?
YES >> GO TO 4
NO >> Repair or replace harness.
4.CHECK TRUNK LID OPENER SWITCH
Refer to See: Component Inspection\Sedan Without Intelligent Key.
Is the Inspection result normal?
YES >> GO TO 5
NO >> Replace trunk lid opener switch.
5.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
>> Inspection End.
|