TRUNK LID OPENER CANCEL SWITCH
Description
Cancels trunk lid open operation.
TRUNK LID OPENER CANCEL SWITCH
Diagnosis Procedure
1.CHECK TRUNK LID OPENER CANCEL SIGNAL
Check voltage between BCM connector and ground.
Is the Inspection result normal?
YES >> GO TO 5
NO >> GO TO 2
2.CHECK TRUNK LID OPENER CANCEL SWITCH CIRCUIT
- Disconnect BCM connector.
- Check continuity between BCM connector and trunk lid opener cancel switch connector.
- Check continuity between BCM connector and ground.
Is the Inspection result normal?
YES >> GO TO 3
NO >> Repair harness or connector.
3.CHECK TRUNK LID OPENER CANCEL SWITCH GROUND CIRCUIT
Check continuity between trunk lid opener switch connector and ground.
Is the Inspection result normal?
YES >> GO TO 4
NO >> Repair or replace harness.
4.CHECK TRUNK LID OPENER CANCEL SWITCH
Refer to See: Component Inspection\Sedan Without Intelligent Key.
Is the Inspection result normal?
YES >> GO TO 5
NO >> Replace trunk lid opener cancel switch.
5.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
>> Inspection End.
|