Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Instrument Panel, Gauges and Warning Indicators » Tire Monitoring System » Testing and Inspection » Programming and Relearning » ID Registration Procedure  
 
 
  ID Registration Procedure  
 

Inspection AND ADJUSTMENT

ID Registration Procedure

ID REGISTRATION WITH TRANSMITTER ACTIVATION TOOL

NOTE:
This procedure must be done after replacement of a low tire pressure warning transmitter or BCM.
New replacement transmitters are provided "asleep" and must first be "woken up" using Transmitter
Activation Tool J-45295 before ID registration can be performed.

  1. Connect CONSULT-III.
  2. Select "ID REGIST" under BCM.

  

  1. Push the transmitter activation tool against the tire near the front left transmitter. Press the button for 5 seconds.

Tool number : (J-45295)

  1. Register the IDs in order from FR LH, FR RH, RR RH and RR LH. When ID registration of each wheel has been completed, the hazard warning lamps flash.

  

  1. After completing all ID registrations, press "END" to complete the procedure.

NOTE:
Be sure to register all of the IDs in order from FR LH, FR RH, RR RH, to RR LH, or the self-diagnostic results display will not function properly.

ID REGISTRATION WITHOUT TRANSMITTER ACTIVATION TOOL

NOTE:
This procedure must be done after replacement of a low tire pressure warning transmitter or BCM.
New replacement transmitters are provided "asleep" and must first be "woken up" using Transmitter
Activation Tool J-45295 before ID registration can be performed.

  1. Connect CONSULT-III.
  2. Select "ID REGIST" under BCM.
  3. Adjust the tire pressures to the values shown in the table and drive the vehicle at 40 km/h (25 MPH) or more for a few minutes.

  

  1. After completing all ID registrations, press "END" to complete the procedure.

  

  1. Inflate all tires to proper pressure. Refer to See: Maintenance\Wheels and Tires\Tires\Specifications.