Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Windows and Glass » Windows » Testing and Inspection » Symptom Related Diagnostic Procedures » Anti-Pinch System Does Not Operate Normally (Driver Side) » LH & RH Front Anti-Pinch-Sedan  
 
 
  LH & RH Front Anti-Pinch-Sedan  
 

ANTI-PINCH SYSTEM DOES NOT OPERATE NORMALLY (DRIVER SIDE)

Diagnosis Procedure

  1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to See: Programming and Relearning\Additional Service When Replacing Control Unit\Special Repair Requirement\LH & RH Front Anti-Pinch-Sedan.

Is the Inspection result normal?
YES >> GO TO 2
NO >> Repair or replace the malfunctioning parts.

  1. CHECK DOOR WINDOW SLIDING PART
    • A foreign material adheres to window glass or glass run rubber.
    • Glass run rubber wear or deformation.
    • Sash is titled too much or not enough. Is the Inspection result normal?

YES >> GO TO 3
NO >> Repair or replace the malfunctioning parts.

  1. CHECK ENCODER CIRCUIT Check encoder circuit. Refer to See: Component Tests and General Diagnostics\Encoder\Driver Side\Component Function Check\LH & RH Front Anti-Pinch-Sedan.

Is the Inspection result normal?
YES >> Inspection end.
NO >> Check intermittent incident. Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.