AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATES NORMALLY (PASSENGER SIDE)
Diagnosis Procedure
- PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to See: Programming and Relearning\Additional Service When Replacing Control Unit\Special Repair Requirement\LH & RH Front Anti-Pinch-Sedan.
Is the Inspection result normal?
YES >> GO TO 2
NO >> Repair or replace the malfunctioning parts.
- CHECK ENCODER Check encoder. Refer to See: Component Tests and General Diagnostics\Encoder\Passenger Side\Component Function Check\LH & RH Front Anti-Pinch-Sedan.
Is the Inspection result normal?
YES >> Inspection end.
NO >> Check intermittent incident. Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
|
